English_13
●
INTRODUCTION
LENS
Lenses are sold separately. Lenses such as an auto iris lens, CS-Mount lens and C-Mount
lens can be used.
Please keep the lens clean.
Any foreign objects and fi ngermarks on the lens can cause inferior image quality in low light level
conditions.
WHEN USING AN AUTO IRIS LENS
Please peel off about 8mm of the outer skin of the auto iris lens cable.
Please peel off about 2mm of the outer skin of the insulated conductor inside
the lens cable.
Please remove the cover of the auto iris lens connection plug and solder the
lens cable to the connector pin in the plug.
LENS
Pin No.
DC
VIDEO
No.1 Pin
Damping -
Red (power)
No.2 Pin
D
NC
No.3 Pin
Drive +
White (video signal)
No.4 Pin
Drive -
Black (GND)
Please replace the auto iris lens connection plug cover and take off the CCD protection
cap, and then attach the auto iris lens to the camera by screwing it in clockwise.
1.
2.
3.
4.
f
e
approx. 8mm
approx. 2mm
No.3 Pin
No.1 Pin
Connector
Lens cable
No.4 Pin
No.2 Pin
Summary of Contents for SCB-1000
