Samsung SCB-1000, User Manual

Page: 21 / 40

English_21
●
CAMERA OPERATION
e
is
d.
※ Please select one of the 3 modes below.
ATW(Auto Tracking White Balance) :
This mode can be used within the color temperature range 1,800°K ~ 10,500°K
(Ex. fl uorescent light, outdoor, sodium vapor lamp or inside tunnels)
AWC(Auto White Balance Control) :
Please press the SETUP button while the camera is directed at a piece of white
paper to obtain the optimum state under current illumination. If the environment
including the light source is changed, you have to adjust the white balance again.
MANUAL :
The manual adjustment mode enables fi ner adjustment.
Please select ATW or AWC fi rst. Please change to manual adjustment mode and
press the SETUP button. Please set the appropriate color temperature, and then
increase or decrease the red and blue color values while monitoring the color
changes on the object.
Under the following conditions the WHITE BALANCE function may not operate
properly.
➊
When the object´s surroundings are dark
➋
If the camera directly faces a fl uorescent light or is installed in a place
where there are considerable changes in illumination, the WHITE
BALANCE function may become unstable.
BACKLIGHT (BACKLIGHT COMPENSATION)
When there is a strong backlight behind the object, clear images of the background as
well as the object can still be obtained by using the BACKLIGHT function.
Please position the arrow to point to
‘BACKLIGHT’ on the SETUP menu by using
the UP and DOWN buttons.
Please select the mode you wish to operate
by pressing the LEFT or RIGHT button.
y
y
y

1.
2.
SETUP
LENS DC
SHUTTER ---
WHITE BAL. ATW
䯝
BACKLIGHT OFF
AGC MIDDLE