background image

iv

_ English

1. 

Read these instructions.

2. 

Keep these instructions.

3. 

Heed all warnings.

4. 

Follow all instructions.

5. 

Do not use this apparatus near water.

6. 

Clean only with dry cloth.

7. 

Do not block any ventilation openings. Install in 
accordance with the manufacturer’s instructions.

8. 

Do not install near any heat sources such as radiators, 
heat registers, stoves, or other apparatus (including 
amplifiers) that produce heat.

9. 

Do not defeat the safety purpose of the polarized or 
grounding-type plug. A polarized plug has two blades 
with one wider than the other. A grounding type plug 
has two blades and a third grounding prong. The wide 
blade or the third prong are provided for your safety. If 
the provided plug does not fit into your outlet, consult 
an electrician for replacement of the obsolete outlet.

10. 

Protect the power cord from being walked on or 
pinched particularly at plugs, convenience receptacles, 
and the point where they exit from the apparatus.

11. 

Only use attachment/accessories specified by the 
manufacturer.

12. 

Use only with the cart, stand, tripod, bracket, or 
table specified by the manufacturer, or sold with the 
apparatus. When a cart is used, use caution when 
moving the cart/apparatus combination 
to avoid injury from tip-over.

13. 

Unplug this apparatus during lightning 
storms or when unused for long periods 
of time.

14. 

Refer all servicing to qualified service personnel. 
Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or 
plug is damaged, liquid has been spilled or objects 
have fallen into the apparatus, the apparatus has been 
exposed to rain or moisture, does not operate normally, 
or has been dropped.

15. 

Apparatus shall not be exposed to dripping or 
splashing and no objects filled with liquids, such as 
vases, shall be placed on the apparatus.

16. 

VENTILATION: 
Slots and openings in the cabinet are provided 
for ventilation to ensure reliable operation of the 
CAMCORDER and to protect it from overheating. 
These openings must not be blocked or covered. 
Never place your CAMCORDER on a bed, sofa, rug, 
or other similar surface: on or near a radiator or heat 
register. This CAMCORDER should not be placed in a 
built-in installation such as a bookcase or rack unless 
proper ventilation is provided or the manufacturer’s 
instructions have been adhered to.

important safety instructions

(AD68-02550A) SC-DX100_ENG_IB.indb   4

2008-03-10   ¿ÀÈÄ 4:15:10

Summary of Contents for SC-DX103





























































































































Reviews: