Samsung SC-DX103 Page 36 User Manual Download

Page: 36 / 124

_ English

USING THE DISPLAY (

) BUTTON

Switching the information display mode

You can switch between the on-screen information display modes:

Slide the POWER switch downwards to turn on the power, and then press the Display

(

) button.

Each press of the Display button toggles the OSD (On Screen Display) function on and off.

•

Full display mode

: All information will appear.

•

Minimum display mode

: Only operating status indicators will appear.

If the DVD camcorder has warning information, a warning message will appear.

USING THE JOYSTICK

The

Joystick

is used to make a selection and to move the cursor left, right, up and down.

Using the

Joystick

, you can easily make your selection and navigate the menu.

Move to a previous menu item / Adjust the selected item (to the left).

Move to a sub menu item / Adjust the selected item (to the right).

Move to a lower menu item.

Move to an upper menu item.

Press to select the chosen item (Select).

preparation

(AD68-02550A) SC-DX100_ENG_IB.indb 26

2008-03-10 ¿ÀÈÄ 4:16:09

Summary of Contents for SC-DX103





























































































































Search results

Summary of Contents for SC-DX103

Reviews:

Related manuals for SC-DX103

Brands by name

Popular brands

Samsung SC-DX103, User Manual

Search results

Summary of Contents for SC-DX103

Reviews:

Related manuals for SC-DX103

Brands by name

Popular brands