Mobile WiMAX/TD-LTE RRH-2WB Installation Manual
© SAMSUNG Electronics Co., Ltd.
B-1
ANNEX B.
Installing Feeder Cable
B.1 Cautions When Installing Feeder Cable
When installing the feeder, the following cautions shall be considered:
Put a plate to work not to make damage for the surface of the feeder cable.
If there is external damage of the feeder cable, cut the damaged part and work wiring.
After connecting the antenna to the feeder cable, finish the connection part of the
contracted pipe using the contracted tube.
Attach the cognitive tapes to the both ends of the feeder cable, which makes it easy to
recognize.
When connecting cabinet, antenna and lightening arrestor, etc. to the feeder cable,
connect strongly to prevent from generating reflected wave.
The curvature radius should be maximized, keep the minimum curvature radius.
Table B.1 Curvature Radius of Feeder Cable for Outdoor
Specification
Allowed Radius of Curvature
Remark
LS Feeder
Line
HFC-12D
1/2 in.
125 mm (4.92 in.)
Outdoor
HFC-22D
7/8 in.
250 mm (9.84 in.)
HFC-33D
1-1/4 in.
380 mm (14.96 in.)
HFC-42D
1-5/8 in.
510 mm (20.08 in.)
RFS Feeder
Line
LCF12-50
1/2 in.
125 mm (4.92 in.)
LCF78-50
7/8 in.
250 mm (9.84 in.)
LCFS114-50
1-1/4 in.
380 mm (14.96 in.)
LCF158-50
1-5/8 in.
500 mm (19.69 in.)
Summary of Contents for RRH-2WB
Page 1: ...Ver 2600 00ETB9GAA 2 0 Mobile WiMAX TD LTE RRH 2WB Installation Manual ...
Page 6: ...INTRODUCTION IV SAMSUNG Electronics Co Ltd This page is intentionally left blank ...
Page 12: ...SAFETY CONCERNS X SAMSUNG Electronics Co Ltd This page is intentionally left blank ...
Page 138: ...ANNEX F Standard Torque F 2 SAMSUNG Electronics Co Ltd This page is intentionally left blank ...