manualshive.com logo in svg

Samsung RF32FMQDBSR/AA, RF32FMQDBSR/AA, Service Manual, Page: 69 / 127

Share
Download
Samsung RF32FMQDBSR/AA, RF32FMQDBSR/AA Service Manual Download Page 69

69

4. TROUBLESHOOTING

4-1. Functions for failure diagnosis

4-1-1. Test mode (manual operating / manual defrosting function)

•  ① If Freezer Key + Control Test Key are pressed simultaneously for 6 seconds, ALL ON/OFF will blink with 

0.5interval for 4 seconds.

•  ② If take the finger off from above keys and press Control Lock, it will be change to the test mode and all 

displays on the front of panel will be off.

•  If test key on the front of panel is pressed within 15 seconds after the test mode, it will be operated as below 

sequence : 
Forced Operation (FF) → CoolSelect Room OFF Forced Operation (OF c) → 2 Comp Simultaneous Forced 
Operations (Fr) → Forced F/CV/R (Fan) Defrosting (Fd) 
※ Test Key :  Fridge, Freezer,  Cool Select , Control Lock

•  If test key on the front of panel is not pressed within 15 seconds after the test mode, the test mode will be 

canceled and it will be returned to previous mode.

①

①

②

1) Manual operation function

Summary of Contents for RF32FMQDBSR/AA, RF32FMQDBSR/AA
































































































































Reviews:

No comments