Samsung RF32FMQDBSR/AA, RF32FMQDBSR/AA, Service Manual, Page: 26 / 127

26
DISASSEMBLY AND REASSEMBLY
3-3. Disassembling the Fridge Doors (RF24J* only)
How To Do Descriptive Picture
1. Remove the 6 screws fixing the Top Table.
2. Open the right door of the fridge compartment
so that it does not interfere with the Bracket (②)
and the Top Table.
Lift the back side of the Top Table and pull it to
the front to disassemble.
3. Separate the 2 housing connectors (②) from the
hinge at the top left of the fridge compartment
door and the 1 housing connector (②-1) from
the hinge at the top right of the door.
To separate the housing connectors more easily,
pull the connector while holding down the fixing
hook (③).
Caution
Make sure to unplug the power cord
before performing the procedures
above.
[Note] The number of housing units may differ
depending on the model.
3
2
2-1
3
2
2-1
4. As shown in the picture, Remove the water
tube from hinge by holding at the both sides of
the Tube Fitting (④) and pulling it out. After that,
remove the Tube Fitting by pulling the water
hose after pushing in the locking ring (⑤).
[Note] For Dispenser model only
5. Push the Pusher (⑦) in the direction of the
arrow at the right hinge to disassemble.