Samsung RF32FMQDBSR/AA, RF32FMQDBSR/AA, Service Manual, Page: 63 / 127

63
DISASSEMBLY AND REASSEMBLY
( 3 ) Chef Pantry
Chef
Pantry
Chef pantry will change to Fish/Meat or Fridge Mode automatically depending on
the set fridge temperature.
The Fish/Meat Mode lets you store fish and meat at its freshest for a short period
of time.
To store fish or meat for longer, put it into the Cool Select Room and select the
“Freezer” or “Soft Freeze” functions.
• If you set the fridge temperature to 34~36 °F, the Chef Pantry changes to Fish/
Meat Mode and the Fish/Meat icon lights.
The Chef Pantry is set to 30 °F (-1 °C) in the Fish/Meat mode.
• If you set the fridge temperature to 37~44 °F, the Chef Pantry changes to Fridge
Mode and the Fridge Icon turns on.
( 4 ) CoolSelect (Hold 3 sec for Reset Filter)
• The CoolSelect button lets you set the Cool Select Room on the bottom right of
your refrigerator to one of four settings: Freezer, Soft Freezing, Chill, or Cool.
• To reset the water filter life indicator.After you replace the water filter, touch and
hold this button for 3 seconds to reset the water filter life indicator.
Freezer
Touch Freezer to set the Cool Select Room to the same temperature as the
freezer.
• Use this setting to keep frozen food fresh.
Soft
Freeze
• Touch Soft Freeze to set the temperature in the Cool Select Room to 23 °F (-5 °C)
.This feature helps keep meat and fish fresh longer.
Chill
• Touch Chill to set the temperature of the Cool Select Room to 30 °F (-1 °C).
Cool
• Touch Cool to set the temperature of the Cool Select Room to 41 °F (5 °C). You
can keep water, juice, soft drinks, beer, etc. cold.
Filter
Water filter usage
This icon lights when you need
to change the filter, usually after the
refrigerator has dispensed about 300
gallons of water (after about 6 months). The icon will blink red for several seconds
when you open or close the door.
After you install the new water filter, reset the filter indicator by touching and
holding the "CoolSelect(Hold 3 sec for Reset Filter)" button for 3 seconds.
• If water is not dispensing or dispensing slowly, you need to replace the water
filter because the water filter is clogged.
• Some areas have large amounts of lime in their water, which causes the water
filter to clog more quickly.