manualshive.com logo in svg

Samsung RF32FMQDBSR/AA, RF32FMQDBSR/AA, Service Manual, Page: 44 / 127

Share
Download
Samsung RF32FMQDBSR/AA, RF32FMQDBSR/AA Service Manual Download Page 44

44

DISASSEMBLY AND REASSEMBLY

3-20. Disassembling the Fridge Internal Lamp

3-21. Disassembling the Freezer Internal Lamp

How To Do

Descriptive Picture

1.  Insert the (-) screw driver into the hook at the 

 back and pull the internal lamp cover forward to 
 separate it.

 

Caution

Take care not to scratch the cabinet or 
damage the screw cover.

 

Caution

Be sure to unplug the power cord before 
performing the operation above.

How To Do

Descriptive Picture

1.   Insert the (-) screw driver into the hook at the 

 back and pull the internal lamp cover forward to 
 separate it.

 

Caution

Take care not to scratch the cabinet or 
damage the screw cover.

 

Caution

Be sure to unplug the power cord before 
performing the operation above.

2.  Separate the LED by tilting it and then 

 separating the housing connector.

Summary of Contents for RF32FMQDBSR/AA, RF32FMQDBSR/AA
































































































































Reviews:

No comments