13
Switching On and Off
ENG
If your Media Station isn’t turned on when the power button is
pressed, please check if the “TV” mode has been chosen by
pressing the “Select” button.
1
Plug the mains lead of the PDP and Media Station into an
appropriate socket.
2
Connect the video cable between the
DISPLAY SIGNAL IN
on the
rear of the PDP and the
DISPLAY SIGNAL OUT
on the rear of the
Media Station.
3
Press the
POWER
button on the front panel of the Media Station
or remote control to switch the display on.
☛
◆
If you have purchased this PDP in the United Kingdom,
refer to page 55 for further instructions on plug wiring.
◆
Do not connect the power cord between PDP and
Media Station. Otherwise, the
EMI
characteristic will
become worse because power input and output
signals interrupt each other.
◆
The ferrite core is used to attenuate undesired signals.
When you connect the power cord to the
POWER IN
connector on the rear of the Media Station, bind the
power cord round the ferrite core to secure it.
Rear of the Media Station
- Video Cable
Rear of the PDP
I
Power cord
I
