Samsung PL50A610T1R, User Manual

Page: 62 / 136

English -
Listening through a Receiver (Home theater)
You can listen to sound through a receiver instead of the TV speaker.
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Input , then press the ENTER button.
Press the ▲ or ▼ button to select (HDMI-CEC) , then press the ENTER button.
Press the ▲ or ▼ button to select Receiver , then press the ENTER button.
4 Press the ◄ or ► button to select to On , then press the ENTER button.
Now you can listen to sound through the receiver.
5 Press the EXIT button to exit.
➢ If your receiver supports audio only, it may not appear in the device list.
➢
When listening through the receiver, there are restrictions for using the audio-related (MTS) menus.
➢ If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power
failure), the TV Speaker may be set to Off when you turn the TV on again.
Check Points before Requesting Service
Symptom Solution
does not work. ■ Check if the device is an Anynet
+ device. The system supports devices
only.
■ Connect only one receiver (home theater).
■ Check if the Anynet
+ device power cord is properly connected.
■ Check the Anynet
+ device’s Video/Audio/HDMI cable connections.
■ Check whether (HDMI-CEC) is set to On in the setup menu.
■ Check whether the TV remote control is in TV mode.
■ Check whether it is exclusive remote control.
■ doesn’t work in certain situations. (Searching channels, Plug & Play, etc.)
■ When connecting or removing the HDMI cable, please make sure to search devices
again or turn your TV off and on again.
■ Check if the Function of device is set on.
I want to start Anynet
+
. ■ Check if the Anynet
+ device is properly connected to the TV and check if the
(HDMI-CEC) is set to On in the Setup menu.
■ Press the TV button on the TV remote control to switch to TV. Then press the TOOLS
button to show the menu and select a menu you want.
I want to exit Anynet
+
. ■ Select View TV in the menu.
■ Press the SOURCE button on the TV remote control and select a device other than
devices.
■ Press CH, CH LIST and PRE-CH to change to the TV mode.
(Note that the channel button operates only when an device with a built-in tuner
is not connected.)
The Connecting to device...
message appears on the screen.
■ You cannot use the remote control when you are configuring Anynet
+ or switching to a
view mode.
■ Use the remote control when the Anynet
+ setting or switching to view mode is complete.
The device does not play. You cannot use the play function when Plug & Play is in progress.
The connected device is not
displayed.
■ Check whether or not the device supports Anynet
+ functions.
■ Check whether or not the HDMI cable is properly connected.
■ Check whether (HDMI-CEC) is set to On in the setup menu.
■ Search devices again.
■ You can connect an Anynet
+ device using the HDMI cable only. Some HDMI cables may
not support functions.
The TV program cannot be
recorded.
Check whether the antenna jack on the recording device is properly connected.
Enter
Move
View TV
Select Device

Record

Menu on Device

Device Operation

Receiver :On

Setup 
TV P 1
Exit
BN68-01613-00-Eng.indb 62 27/05/2008 13:41:28