Samsung PE43H4000A, Manual

Page: 65 / 185

English - 19
English
Adjusting Picture Settings
Cell Light / Contrast / Brightness / Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality control.
✎
NOTE
• In analogue TV , Ext. , AV modes of the PAL system, the Tint (G/R) function is not available.
• Settings can be adjusted and stored for each external device connected to the TV.
• Lowering picture brightness reduces power consumption.
Picture Size
O
MENU m
→
Picture
→
Picture Size
→
ENTER E
Set the various picture options such as picture size and aspect ratio.
✎ The available items may differ depending on the selected mode.
✎
Depending on the input source, the picture size options may vary.
•
Picture Size t : Your cable box/satellite receiver may have its own set of screen sizes as well. However, we
highly recommend you use 16:9 mode most of the time.
Auto Wide : Automatically adjusts the picture size to the 16:9 aspect ratio.
16:9 : Sets the picture to 16:9 wide mode.
Wide Zoom : Magnifies the picture size more than 4:3.
✎
Adjusts the Position by using
▲
,
▼
buttons.
Zoom : Magnifies the 16:9 wide pictures vertically to fit the screen size.
✎ Adjusts the Zoom or Position by using ▲ , ▼ button.
4:3 : Sets the picture to basic (4:3) mode.
✎
Do not watch in 4:3 format for a long time. Traces of borders displayed on the left, right and centre of the
screen may cause image retention (screen burn) which are not covered by the warranty.
Screen Fit : Displays the full image without any cut-off when HDMI (720p / 1080i / 1080p) or Component (1080i /
1080p) signals are inputted.
• Zoom/Position
: Adjust the picture size and position. It is only available in
Zoom
.
• Position : Adjust the picture position. It is only available in Screen Fit or Wide Zoom .
✎ NOTE
•
After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode, you may need to
centre the picture:
1. Select the Position . Press the ENTER E button.
2.
Press the ▲ , ▼ , ◄ or ► button to move the picture.
•
If you want to reset the position you adjusted, select Reset in the Position screen. The picture will be set to its
default position.
• If you use the Screen Fit function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in
the overscan function.
• 4:3 Screen Size : Available only when picture size is set to Auto Wide . You can determine the desired picture
size at the 4:3 WSS (Wide Screen Service) size or the original size. Each European country requires different
picture size.
[PH4000-RU]BN68-05792L-00L04.indb 19 2014-02-03 7:22:00