Samsung OHN Series User Manual Download Page 37

Page: 37 / 113

Using MDC

Multiple display control "MDC" is an application that allows you to easily control multiple

display devices simultaneously using a PC.
For details on how to use the MDC program, refer to Help after installing the program. The MDC

program is available on the website. (http://displaysolutions.samsung.com)

If you press the

Off

button located at the top left of the screen, the product checks its

status for about one minute. To run other commands, try after the one minute.

For details on how to connect devices for multiple display control, refer to page

MDC Program Installation/Uninstallation

Installing and uninstalling steps can vary depending on the OS.

Installation

MDC installation can be affected by the graphics card, mother board and network

conditions.

Click the

MDC Unified

installation program.

Click "

When the "

Welcome to the InstallShield Wizard for MDC_Unified

" screen appears, click

In the "

License Agreement

" window displayed, select "

I accept the terms in the license

agreement

" and click "

In the displayed "

Customer Information

" window, fill out all the information fields and click

In the displayed "

Destination Folder

" window, select the directory path you want to install

the program in and click "

If the directory path is not specified, the program will be installed in the default

directory path.

In the displayed "

Ready to Install the Program

" window, check the directory path to install

the program in and click "

Install

Installation progress will be displayed.

Click "

Finish

" in the displayed "

InstallShield Wizard Complete

" window.

Select "

Launch the program

" and click "

Finish

" to run the MDC program immediately.

The

MDC Unified

shortcut icon will be created on the desktop after installation.

The MDC execution icon may not be displayed depending on the PC system or product

specifications.

Press F5 if the execution icon is not displayed.

Uninstallation

Select

Settings

→

Control Panel

on the

Start

menu and double-click

Add/Delete Program

Select

MDC Unified

from the list and click

Change/Remove

Summary of Contents for OHN Series


















































































































Search results

Summary of Contents for OHN Series

Reviews:

Related manuals for OHN Series

Brands by name

Popular brands

Samsung OHN Series, User Manual

Search results

Summary of Contents for OHN Series

Reviews:

Related manuals for OHN Series

Brands by name

Popular brands