Samsung OHN Series User Manual Download Page 66

Page: 66 / 113

OnScreen Display

Display Orientation

→

OnScreen Display

→

Display Orientation

→

ENTER

Display Orientation

Onscreen Menu Orientation

Source Content Orientation

Aspect Ratio

Landscape

Full Screen

The displayed image may differ depending on the model.

Onscreen Menu Orientation

Select whether the onscreen menu should be displayed in landscape or portrait orientation.

•

Landscape

: Display the menu in landscape mode.

•

Portrait

: Display the menu in portrait mode on the right side of the product screen.

Source Content Orientation

Rotate the product screen orientation.

This feature is not available for input source resolutions higher than 7680 x 4320.

•

Landscape

: Display the screen in landscape mode.

•

Portrait

: Display the screen in portrait mode.

Aspect Ratio

Set the rotated screen to be either full screen or original.

•

Full Screen

: Display the rotated screen in full screen.

•

Original Ratio

: Display the rotated screen in the original aspect ratio.

Available only when

Source Content Orientation

is set to

Portrait

Chapter 07

Summary of Contents for OHN Series


















































































































Search results

Summary of Contents for OHN Series

Reviews:

Related manuals for OHN Series

Brands by name

Popular brands

Samsung OHN Series, User Manual

Search results

Summary of Contents for OHN Series

Reviews:

Related manuals for OHN Series

Brands by name

Popular brands