Samsung OHN Series User Manual Download Page 58

Page: 58 / 113

Advanced Settings

→

Picture

→

Advanced Settings

→

ENTER

Advanced Settings

Picture Enhancer

HDR+ Mode

Color

Tint (G/R)

White Balance

Gamma

Off

BT.1886

The displayed image may differ depending on the model.

Configure advanced picture settings to create your preferred picture.

Picture Enhancer

Displays enhanced color and sharpness.

•

Off

HDR+ Mode or HDR10+ Mode

Automatically provide an optimal HDR effect based on the video source.

•

Off

This function may not be supported depending on the model.

Models with

Local Dimming

support

HDR10+ Mode

Color

Adjust the color saturation levels. Color saturation intensifies as the value nears 100. (Range: 0~100)

Tint (G/R)

Adjust the ratio of green to red tint levels. Increasing values intensifies the saturation of red and green colors.

(Range: 0~50)

Summary of Contents for OHN Series


















































































































Search results

Summary of Contents for OHN Series

Reviews:

Related manuals for OHN Series

Brands by name

Popular brands

Samsung OHN Series, User Manual

Search results

Summary of Contents for OHN Series

Reviews:

Related manuals for OHN Series

Brands by name

Popular brands