Samsung OHN Series User Manual Download Page 92

Page: 92 / 113

Fan & Temperature

→

System

→

Fan & Temperature

→

ENTER

It sets items related to the speed and temperature of the fan in each set.

This feature is only available for the full outdoor displays (OH* series).

Fan Control

Selects auto or manual for the fan speed settings.

•

Auto

Manual

Fan Speed Setting

Sets the fan speed within a range of 1 and 100.

Enabled when

Fan Control

is set to

Manual

Outdoor Mode

To use the product at a low temperature below 0 °C, make sure to set

Outdoor Mode

to "

This feature keeps the internal temperature of the product steady so that the product can start

properly when it is powered on.

•

Off

Do not disconnect the power cable when this feature is set to "

The product consumes more power when it is turned off if this feature is set to "

" rather

than to "

Off

Fan Settings

→

System

→

Fan Settings

→

ENTER

It sets items related to the speed and temperature of the fan in each set.

This feature is only available for the semi-outdoor displays (OM* series).

Fan Control

Selects auto or manual for the fan speed settings.

•

Auto

Manual

Fan Speed Setting

Sets the fan speed within a range of 1 and 100.

Enabled when

Fan Control

is set to

Manual

Summary of Contents for OHN Series


















































































































Search results

Summary of Contents for OHN Series

Reviews:

Related manuals for OHN Series

Brands by name

Popular brands

Samsung OHN Series, User Manual

Search results

Summary of Contents for OHN Series

Reviews:

Related manuals for OHN Series

Brands by name

Popular brands