Samsung OH46B User Manual Download Page 34

Page: 34 / 107

Connecting to a PC

•

Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.

•

A PC can be connected to the product in a variety of ways.
Select a connection method suitable for your PC.

―

Connecting parts may differ in different products.

Connection Using an HDMI-DVI Cable

After connecting a computer to the product with an HDMI-DVI cable, make sure to configure the settings
as shown below to enable the video from the computer.

―

The appearance may differ depending on the product.

―

Connecting parts may differ in different products.

―

Audio is not available if the DVI port on the product is connected to the HDMI port on the PC using a DVI-HDMI
adapter.

Connection Using an HDMI Cable

―

The appearance may differ depending on the product.

―

Connecting parts may differ in different products.

HDMI IN 1, HDMI IN 2

Summary of Contents for OH46B












































































































Search results

Summary of Contents for OH46B

Reviews:

Related manuals for OH46B

Brands by name

Popular brands

Samsung OH46B, User Manual

Search results

Summary of Contents for OH46B

Reviews:

Related manuals for OH46B

Brands by name

Popular brands