Preface
About Your Samsung OfficeServ500 System
The Samsung OfficeServ500 system comprises three separate versions: ‘S’ (small), ‘M’ (me-
dium) and ‘L’ (large). They are defined by their size and functionality—the larger systems provid-
ing support for more telephone ports and features than the smaller systems—and are designed
to suit a wide range of commercial and business activities.
About This Manual
This manual describes how to install your system and how to connect peripheral equipment such
as keysets, printers, PCs for remote programming and so on. It also explains what you need to
do to power up and configure your system.
It is recommended that you read each chapter in sequence and follow the procedures carefully.
This way you will ensure that your system is set up correctly. If you encounter problems during
the installation, contact your supplier/dealer in the first instance.
Supporting Documents
The following guides and manuals are also available for your system
.
You may need to refer to
one or more of them during installation. You should have them available for guidance when your
system is fully installed and operational.
y
Samsung OfficeServ500 General Description
This guide provides an overview of the system, including possible structural configurations
and hardware, features and facilities, and specifications.
y
Samsung Combined Systems Programming Manual
The system is configured using MMC (Man Machine Communication) programming. The in-
staller or system administrator programs the system using MMCs from a digital display phone.
This manual describes each MMC and how it is used.
y
Samsung Samsung OfficeServ500 System Administration Guide
This guide provides easy to follow instructions for the system administrator on setting up the
features most commonly required by telephone users.
y
Samsung Digital Keyset, Internet Phone & Single Line Telephone User Guides
Refer to the appropriate user guide for each type of telephone connected to your system.
These may include Samsung DCS (Euro) digital keysets, OfficeServ500 series digital keysets
and IP phones,
i
DCS series digital keysets, and single line telephones.
Summary of Contents for OfficeServ500
