English - 9
DOOR REMOVAL
For normal use, the oven door must not be removed but if removal is necessary, for example, for
cleaning purposes, follow these instructions.
CAUTION
: The oven door is heavy.
70
2
1
1.
Open the door and flip
open the clips at both
hinges completely.
2.
Close the door by
approximately 70 °. With
both hands, grasp the
sides of the oven door at its
middle and pull-lift until the
hinges can be taken out.
3.
After cleaning, for
attaching the door repeat
the 1 and 2 steps in
revers order. The clip
on the hinge should be
closed on both side.
DOOR GLASS REMOVAL
The oven door is equipped with three sheets of glass placed against each other. These sheets can
be removed for cleaning.
Glass 1
Glass 1
Glass 1
Glass 2
Glass 1
Glass 2
1.
Press the both buttons on
the left and right sides of
the door.
2.
Detach the covering and
remove glass 1 and 2
from the door.
3.
After cleaning the door
glasses, for assembly
repeat 1, 2 steps in revers
order. Check the right
locations of glass 1 and 2
with above picture.
ATTACHING:
The Door-Glass is different from 2 EA to 4 EA model by model.
When assembly the inner glass 1, put printing to direction below.
AUTO ENERGY SAVING FUNCTION
•
If you do not select any function when appliance is in the middle of setting or operating with
temporary stop condition, function is canceled and clock will be displayed after 10 minutes.
•
Light : During cooking process, you can switch off Oven lamp by pressing ‘Oven light’ button.
For energy saving, the oven lighting is switched off a few minutes after cooking program has
started.
01
USING THIS MANU
AL & SAFET
Y INS
TRUC
TIONS
NV690_HC_DG68-00593C-00_EN.indd 9
2014-05-12 �� 3:22:09
