English 45
Oper
ating the o
v
en
After a Hybrid cleaning cycle
•
Take care when opening the door after a Hybrid cleaning procedures has
ended. The water on the bottom is hot.
•
Open the oven door and remove the remaining water with a sponge. Do not
leave the residual water in the oven for any length of time. Wipe the oven
clean and dry with a soft cloth. Do not forget to wipe under the oven door
seal.
•
Use a detergent-soaked sponge, a soft brush, or a nylon scrubber to wipe the
oven interior. Remove stubborn residue with a nylon scourer. You can remove
lime deposits with a cloth soaked in vinegar.
•
If the oven remains dirty, you can repeat the procedure once the oven has
cooled.
•
For heavy residue, such as grease left over from roasting, we recommend
that you rub detergent into the residue before activating the Hybrid cleaning
function.
•
After cleaning, leave the oven door ajar at a 15° angle to allow the interior
enamel surface to dry thoroughly.
NOTE
•
You will not be able to start a Hybrid cleaning cycle if the Control Lockout
feature is activated or if the oven’s temperature is too hot.
•
The oven door locks automatically. The display will show the cleaning time
remaining. You cannot open the oven door until the temperature drops to a
safe/cool temperature.
•
If the oven is not clean after one cycle, repeat the cycle.
•
You cannot set the oven for cooking until the oven is cool enough for the door
to unlock.
Descale
If you use Steam Bake or Steam Roast functions frequently, we recommend
descaling regularly to remove minerals from the oven that may affect the taste or
quality of food cooked. When running a descaling cycle, use only descaling agents
that are specific to steam ovens or coffee machines.
NOTE
If you use Steam Bake or Steam Roast functions for more than a total of 12 hours,
the Descale indicator turns on. You can still enable the Steam Bake or Steam Roast
functions for the next two hours without descaling. However, after those two
hours are up, the Steam Bake or Steam Roast functions will be disabled until you
run a descaling cycle.
How to run a descale cycle
4:35 PM
Clean
Self clean
Hybrid Clean
Descale
Draining
1.
Turn the Mode knob to
Clean
. The
display will show 4 cleaning selections.
2.
Tap
Descale
.
4:35 PM
START
Descale
Please descale Water Reservoir to improve
quality.
Clean Time
3hr 00min
3.
Tap
START
.
NV51M9770SM_AA_DG68-00997A-01_EN+MES+CFR.indb 45
2018-03-27 3:24:44
Summary of Contents for NV51M9770S Series
