Samsung NP-G15 Page 9 User Manual Download

Page: 9 / 162

Keep the battery out of the

reach of infants and pets, as

they could put the battery into

their mouths.

There is a danger of electric

shock or choking.

Battery Usage Related

If water or another substance

enters the power input jack,

AC adapter or the computer,

disconnect the power cord and

contact the service center.

Damage to the device within the

computer may cause electric

shock or fire hazard.

Usage Related

Disconnect all cables

connected to the computer

before cleaning it. If you are

using a notebook computer,

remove the battery.

There is a danger of electric

shock or damage to the product.

Do not connect a phone line

connected to a digital phone to

the modem.

There is a danger of a electric

shock, fire or damage to the

product.

Summary of Contents for NP-G15



































































































































































Search results

Summary of Contents for NP-G15

Reviews:

Related manuals for NP-G15

Brands by name

Popular brands

Samsung NP-G15, User Manual

Search results

Summary of Contents for NP-G15

Reviews:

Related manuals for NP-G15

Brands by name

Popular brands