Samsung NP-G15 User Manual Download

Page: 35 / 162

Status Indicators

Power

This shows the computer operating

status.

Green:

When the battery is fully

charged or the battery is not installed.

Amber:

When the battery is being

charged.

Off:

When the computer is running on

battery power without being connected
to AC adapter.

Caps Lock

This turns on when the Caps Lock key
is pressed allowing capital letters to be
typed without holding the Shift button
down.

Scroll Lock

This turns on when the Scroll Lock key
is pressed and screen scroll is locked.

p. 42

Hard Disk Drive

This is lit when the hard disk drive is
operating.

Wireless LAN

This turns on when the wireless LAN
is operating.

Num Lock

This turns on when the Num Lock
key is pressed and numeric keypad is
activated. p. 42

Summary of Contents for NP-G15



































































































































































Search results

Summary of Contents for NP-G15

Reviews:

Related manuals for NP-G15

Brands by name

Popular brands

Samsung NP-G15, User Manual

Search results

Summary of Contents for NP-G15

Reviews:

Related manuals for NP-G15

Brands by name

Popular brands