140
Q
How do I receive a fax while the system is in
power saving mode (Rest mode)?
A
To receive a fax in
Standby
mode, you have to
set it up as follows.
The automatic fax reception function of the fax
program needs to be activated. (For more information,
see the corresponding fax program manual.)
Click
Start > Control Panel > Network and Internet
Connections
.
Under
See Also
, click
Phone and Modem Options
.
In the
Power Management
tab of the
Modem
Properties
window, select the “With this device, exit
the computer from stand-by mode” item and then click
OK
.
The above setting enables the modem to turn on
the system and receive a fax when in power saving
mode.
Q
<Wake On LAN> function
A1
<Wake On LAN> is a function that activates the
system in rest mode when a signal (such as ping
or magic packet commands) arrives from network
(wired LAN).
To use <Wake On LAN> function:
Select
My Network Places > View network
connections
from the Desktop.
Click the right button on the touchpad over
Local
Area Connection
, and select
Properties
.
Click
Configure
, and select
Power Management
tab.
Select “Allow this device to bring the computer out of
standby”, then click
OK
. Restart the system.
– When turning the computer off when the network is
connected without selecting the
<Wake On LAN>
function, the
LAN LED
may not be turned off.
– The
<Wake On LAN>
function is only available
when the LAN is turned on.
– When connecting a wired LAN while using a
wireless LAN, the
<Wake On LAN>
function may
not work. To use the
<Wake On LAN>
function,
select “Do not use Wireless LAN.”
– Connecting wired LAN while using wireless LAN
may not execute
<Wake On LAN>
function.
Configure wireless LAN to “Disable” to use
<Wake
On LAN>
function.
Wired LAN Related
Summary of Contents for NP-G15
Page 1: ...User Guide G15 G16 ...
