Samsung NP-G15 Page 8 User Manual Download

Page: 8 / 162

If the power cord or power outlet

makes a noise, disconnect the

power cord from the wall outlet

and contact a service center.

There is a danger of electric shock

or fire hazard.

Do not use a damaged or loose

mains plug or power cord or

power outlet.

There is a danger of electric shock

or fire hazard.

Plug the power cord firmly into

the power outlet and AC adapter.

Failing to do so may cause fire

hazard.

Do not unplug the power cord

out by pulling the cable only.

If the cord is damaged, it may

cause electric shock.

Do not bend the power cord

excessively or do not place a

heavy object over the power

cord. It is especially important to

keep the power cord out of reach

of infants and pets.

If the cord is damaged, it may

cause electric shock or fire.

Use a wall outlet or multi-plug

with a grounding part.

Failing to do so may cause electric

shock hazard.

Summary of Contents for NP-G15



































































































































































Search results

Summary of Contents for NP-G15

Reviews:

Related manuals for NP-G15

Brands by name

Popular brands

Samsung NP-G15, User Manual

Search results

Summary of Contents for NP-G15

Reviews:

Related manuals for NP-G15

Brands by name

Popular brands