E-
12
Additional Functions (Continued)
Setting the Indoor Unit Option Code
In order to set the indoor unit option code using the wired
remote controller, hold down the
and
buttons and
the
button at the same time for 5 seconds.
1
The menu will display . Press the
button to enter
the indoor unit option code mode.
Note
‘
’ will be displayed if the indoor unit does
not support the function and the setup mode
cannot be entered.
2
Set the first 6 digits of the 12 or 24 digits of the option code
by pressing the
buttons and the
button.
3
Press the
button to set the second set of 6 digits.
If the option code is 24 digits, continue to set the third and
fourth set of 6 digits by pressing the
button.
4
Once the option code is set, press the
button to transmit
the option code to the indoor unit.
5
Press the
button to exit.
6
Press the
button anytime during setup to exit without
setting.
MWR-WS00_E_IM_25180.indd 12
2006-03-28 ｿﾀﾈﾄ 3:13:40
Summary of Contents for MWR-WS00
Page 21: ...E 21 ENGLISH Memo ...
Page 22: ......
