E-
16
Additional Functions (Continued)
RPM Compensation
In order to compensate for the RPM using the wired remote
controller, hold down the
and
buttons and
the
button at the same time for 5 seconds.
1
The menu will display .
Press the
button until is displayed.
Press the
button.
Note
‘
’ will be displayed if the indoor unit does
not support the function and the setup mode
cannot be entered.
RPM compensation can be set only for FAN
relay control models.
2
Press the
buttons to set the RPM compensation
and press the
button.
Value
Function
0
Default (Use indoor unit PCB setting)
1
Set RPM compensation
2
Cancel RPM compensation
3
Press the
button to exit.
4
Press the
button anytime during setup to exit without
setting.
MWR-WS00_E_IM_25180.indd 16
2006-03-28 ｿﾀﾈﾄ 3:13:46
Summary of Contents for MWR-WS00
Page 21: ...E 21 ENGLISH Memo ...
Page 22: ......
