E-
20
Additional Functions (Continued)
Checking the Indoor Unit Option Switch Settings
In order to check the indoor unit option switch settings using the
wired remote controller, hold down the
and
buttons
and the
button at the same time for 5 seconds.
1
The menu will display .
Press the
button and select the appropriate menu
referring to the table below.
Value
Data
9
Centralized control switch
10
Drain pump switch
11
Electric heater switch
12
Hot water heater switch
Note
‘
’ will be displayed if the indoor unit does
not support the function and the setup mode
cannot be entered.
2
If the option switch is set to ON (which means disable
function), the value will display . If the option switch is set to
OFF (which means enable function), the value will display .
3
Press the
button to exit.
4
Press the
button anytime during setup to exit without
setting.
MWR-WS00_E_IM_25180.indd 20
2006-03-28 ｿﾀﾈﾄ 3:13:52
Summary of Contents for MWR-WS00
Page 21: ...E 21 ENGLISH Memo ...
Page 22: ......
