E-
4
Wired remote controller
The wired remote controller is installed on the wall.
Note
DIP switch setting is recognized during the initialization. If any changes are
mode to the DIP switch setting after the initialization, you have to initialize
the system by pressing
and
or reset the power.
Press the
button after cleaning the air filter.
sign will be off.
The remote controller will display the filter sign to alert the user to clean the
filter and turn off the display when the
button are pressed.
will be displayed if you press the button of the function that the
indoor unit does not support.
If the indoor unit does not support Set temperature display,
Set temperature is not displayed on remote controller.
ON/OFF timer/
Error Status display
Operation mode
display
Fan speed/
Air swing display
Special function
display
ON/OFF time setup
Swing button
Room temperature
check button
Filter Reset button
Temperature
display
Operation ON/OFF button
Temperature setting
button
Fan speed setting
button
Mode selection
MWR-WH02_IB_E_33323-1.indd 4
2011-01-10 오후 1:13:28
