E-
9
ENGLISH
Selecting the Fan Mode
Select the fan mode to circulate air without changing the
temperature.
1
Press the
(ON/OFF) button to turn on the indoor unit.
- Do not press the
(ON/OFF) button if the remote
controller is on.
Result:
The air conditioner will be turned on with the
most recently used mode.
The air conditioner has a built-in protection
mechanism to prevent the unit from being damaged
when it is started immediately after being:
Plugged in
Stopped
The air conditioner will start up after 3 minutes.
2
To select the FAN mode, press the
button until
Fan
is
displayed on the remote controller.
Result:
The air conditioner will operate in fan mode.
You cannot adjust the temperature in fan
mode.
3
Select the fan speed by pressing the
button.
Result:
Each time the
button is pressed, fan speed will
change in the following order:
Low
Med
High
4
To adjust the air swing direction, refer to page 13.
Note
If the indoor unit does not support Fan mode,
and you have pressed the
button, the
lamp
will be displayed.
MWR-WH02_IB_E_33323-1.indd 9
2011-01-10 오후 1:13:35
