E-
8
Select the dry mode if the room is too humid.
Using this mode will slightly lower the room temperature.
1
Press the
(ON/OFF) button to turn on the indoor unit.
- Do not press the
(ON/OFF) button if the remote
controller is on.
Result:
The air conditioner will be turned on with the
most recently used mode.
The air conditioner has a built-in protection
mechanism to prevent the unit from being damaged
when it is started immediately after being:
Plugged in
Stopped
The air conditioner will start up after 3 minutes.
2
To select the DRY mode, press the
button until
Dry
is
displayed on the remote controller.
Result:
The air conditioner will operate in dry mode.
The Auto fan speed will be selected
automatically in the dry mode.
You cannot control the fan speed.
3
To adjust the temperature, press the
buttons.
The temperature can be set between 18°C(65°F) and
30°C(86°F).
Result:
The temperature will be adjusted by 1°C(1°F)
when the
buttons are pressed.
4
To adjust the air swing direction, refer to page 13.
Note
If the indoor unit does not support Dry mode,
Dry is not displayed on remote controller.
Selecting the Dry Mode
MWR-WH02_IB_E_33323-1.indd 8
2011-01-10 오후 1:13:34
