Samsung MWR-WG00UN, Installation Manual

Page: 23 / 27

Installation/Service mode
22 English
Installation/Service mode
Installation/S
ervic
e mode
1)* Setting is available when there is only 1 indoor unit connection and while the indoor unit operation is not
operating.
2)*
ťͱиʪθđɇϑϩʪθŵʪϑʪϩ
is a setting needed to supply optimized power to wired remote controller when multiple
indoor units are connected to wired remote controller in a group.
3)* The total option codes are 24 digits. You can set six digits at a time and it is distinguished by page number. Press
the button to move to the next page. [See the image C ]
NOTE
࡙
Address is displayed in hexadecimal. Please refer to the following table.
Hexadecimal Decimal Hexadecimal Decimal Hexadecimal Decimal
00 0 10 16 20 32
01 1 11 17 21 33
02 2 12 18 22 34
03 3 13 19 23 35
04 4 14 20 24 36
05 5 15 21 25 37
06 6 16 22 26 38
07 7 17 23 27 39
08 8 18 24 28 40
09 9 19 25 29 41
0A 10 1A 26 2A 42
0B 11 1B 27 2B 43
0C 12 1C 28 2C 44
0D 13 1D 29 2D 45
0E 14 1E 30 2E 46
0F 15 1F 31 2F 47
Hexadecimal Decimal Hexadecimal Decimal
30 48 40 64
31 49 41 65
32 50 42 66
33 51 43 67
34 52 44 68
35 53 45 69
36 54 46 70
37 55 47 71
38 56 48 72
39 57 49 73
3A 58 4A 74
3B 59 4B 75
3C 60 4C 76
3D 61 4D 77
3E 62 4E 78
3F 63 4F 79
4)* The airflow blades that you can select may differ depending on the indoor unit model.