Samsung Msys 730, User Manual

Page: 63 / 108

4. Press Start/Enter.
5. The display asks you to enter another fax number to receive documents
from another location. If you want to receive documents from more than
one location:
a) Press Start/Enter and enter another fax number using the numeric
keypad, a one-touch button, or speed dial number
The number appears in the display. Repeat Steps 4 and 5 to receive
document from other locations.
Or
b) If you have entered the last fax number, press
Stop .
6. The display asks you to enter a name for the job. To assign a name to the
polling job, enter the name. If a name is not desired, skip this step.
7. Press
Start/Enter.
The display asks you to enter a 4-digit poll code.
8. If the remote machine is secured with a poll code, you must enter the
correct code, and press Start/Enter .
Or
If the remote machine is not secured with a poll code, press
Start/Enter
to accept [0000] which represents no code.
9. The display prompts for the time at which the machine will call and poll
the remote machine. To call the remote machine immediately, skip over
this step without entering a time for polling.
Or
If a specific time for polling is desired, enter the time. If you have
configured your machine to use a 12-hour format, remember to specify
AM or PM.
Note : If you set a time earlier than the current time, your machine calls the
number at that time on the following day.
10. Press
Start/Enter
. If you did not enter a specific time for polling, the
machine dials the remote immediately. If you entered a specific start
time, the machine will call and poll the remote machine at that time.
2 .28
Receiving a fax