Canceling a job already in memory which is waiting to
be polled
If you want to cancel a job already in memory waiting to be polled,
follow the procedure below.
1. Press
Menu
,
then press
Add/Cancel
on the one-touch keypad. The
LCD display prompts you to select 1.ADD or 2.CANCEL.
2. Press
2
.
The set up information for the last entered polling job is displayed. If
you have more than one polling job waiting in memory, press the
„
or
until the set up information for the job you wish to cancel is
displayed.
3. Press
Start/Enter
.
The display prompts ARE YOU SURE?
4. To cancel the polling job, press
1.YES
.
The job is erased from memory and the machine returns to standby
mode.
Polling one or more remote machines (RX poll)
You can set up the machine to automatically receive documents from
unattended remote fax machines. The machine can be set up to receive
the fax now, or at a later time. This feature permits unattended polling
in off-peak hours when telephone rates are lower.
Note
: The remote machine must also support polling to use this feature.
1. Press
Menu
, then press
Polling
on the one-touch keypad. The display
shows the polling options: 1.TX POLL and 2.DELAY RX POLL.
2. Press
2
to select ‘DELAY RX POLL’. The display asks you to enter the
number of the remote fax machine.
3. Enter the telephone number of the remote fax machine. There are
several methods available to do this:
• Direct entry of the telephone number using the numeric keypad
• One-touch keypad dialing of stored telephone numbers (see one-
touch dialing on page 2.32)
• Speed number dialing using the numeric keypad (see speed dialing
on page 2.34)
2
.27
Receiving a fax
2
Operation
Summary of Contents for Msys 730
