2
.26
Receiving a fax
6. The display prompts you to store the document in the machine bulletin
board memory.
Note
: If you store the document in the bulletin board memory, more than one remote
station can poll that document from your machine. If not, the file will be
automatically erased after being polled by a remote machine.
7. To store the document in the bulletin board memory, press
Start/Enter.
Or
If you do not want the document to be stored in bulletin board memory,
press
Stop.
8. The machine stores the document in memory. The display shows a count
of the number of pages being stored in memory and the remaining
memory capacity.
9. The machine returns to standby mode and displays a reminder that a
polling transmission is set. The machine automatically switches to FAX
mode (automatic receiving) when set to be polled.
Adding documents to the job to be polled
If you want to add documents to the original documents waiting in
memory to be polled, follow the procedure below.
1. Place the additional documents face down into the automatic document
feeder.
2. Press
Menu
,
then press
Polling
on the one-touch keypad. The LCD
displays the polling options.
3. Press
1
to select ‘1.TX POLL’.
4. The display prompts you to enter the poll code. The last used poll code is
displayed.
5. Enter the 4-digit poll code you had previously set, then press
Start/Enter
.
The display prompts you to select ‘1.ADD’ or ‘2.CANCEL’.
6. Press
1
.
The machine scans the new documents into memory and returns
to standby mode.
B U L L E T I N ?
Summary of Contents for Msys 730
