2
.32
Automatic dialing
One-touch dialing
One-touch dialing lets you use any one of the 38 one-touch buttons located
on the left of the machine’s control panel to automatically dial a number.
Storing a number for one-touch dialing
1. Press and hold the one-touch button (01 through 19) for 2 seconds that
you want to assign. The display shows `Txx)’, where `xx’ represents the
selected one-touch button.
Press
Shift
button, then press and hold the one-touch button (20 through
38) for 2 seconds that you want to assign. The display show ‘Txx)’, where
‘xx’ represents the selected one-touch button.
2. Enter the number (up to 40 digits) you want to store by using the number
keypad, then press
Start/Enter
.
To insert a pause between numbers, press
Redial/Pause;
a ‘-’(hyphen) symbol appears in the display.
If you make a mistake while entering a number, use
ˆ
ˆ
or
¤
¤
to move the
cursor under the wrong digit, then enter the correct digit, or press
Search/Delete
.
3. The display asks you to enter a name. Enter the desired name (up to 20
digits). For information on how to enter names, see page 2.4.
Or
If you don’t want to assign a name, skip this step.
If you assign a name to the number, the name appears in the display
when you press the one-touch button.
Automatic
dialing
Summary of Contents for Msys 730
