Samsung Monochrome ML-4050 Series User Manual Download

Page: 40 / 110

Open the top cover and pull the toner cartridge out. Set it on a
clean flat surface.

With a dry lint-free cloth, wipe away any dust and spilled toner from
the toner cartridge area and the toner cartridge cavity.

Caution

• To prevent damage to the toner cartridge, do not expose it to

light for more than a few minutes. Cover it with a piece of
paper, if necessary.

• Do not touch the green surface underside of the toner

cartridge. Use the handle on the cartridge to avoid touching
this area.

Caution

• While cleaning the inside of the printer, be careful not to touch

the transfer roller, located underneath the toner cartridge. Oil
from your fingers can cause print quality problems.

Gently swab the long strip of glass (LSU) inside the top of the
cartridge cavity and check for dirt or dust.

Locate the PTL lens by flipping up the guide feed and gently swab
the lens with the pointed white cotton.

Reinsert the toner cartridge and close the top cover.

Plug in the power cord and turn the printer on.

Note

• The long strip of glass is hard to locate.

PTL lens

Summary of Contents for Monochrome ML-4050 Series















































































































Search results

Summary of Contents for Monochrome ML-4050 Series

Reviews:

Related manuals for Monochrome ML-4050 Series

Brands by name

Popular brands

Samsung Monochrome ML-4050 Series, User Manual

Search results

Summary of Contents for Monochrome ML-4050 Series

Reviews:

Related manuals for Monochrome ML-4050 Series

Brands by name

Popular brands