28
Chapter 2. Device setup
Setting the input source (Set Input Source)
Header
Command
ID
Data
length
Data
Checksum
0xAA
0x14
1
“Input Source”
“Input Source”: An input source code to be set on a product.
0x14
PC
0x18
DVI
0x0C
Input source
0x08
Component
0x20
MagicInfo
0x1F
DVI_video
0x30
RF(TV)
0x40
DTV
0x21
HDMI1
0x22
HDMI1_PC
0x23
HDMI2
0x24
HDMI2_PC
0x25
DisplayPort
DVI_video, HDMI1_PC and HDMI2_PC cannot be used with the Set command. They
only respond to “Get” commands.
• This model does not support HDMI1, HDMI1_PC, HDMI2 and HDMI2_PC ports.
•
MagicInfo
is only available with models that contain the
MagicInfo
function.
• RF(TV), DTV are only available with models that include a TV.
Ack
Header
Command ID
Data
length
Ack/
Nak
r-CMD Val1
Checksum
0xAA
0xFF
3
'A'
0x14
“Input
Source”
“Input Source”: An input source code to be set on a product.
Nak
Header
Command ID
Data
length
Ack/
Nak
r-CMD Val1
Checksum
0xAA
0xFF
3
'N'
0x14
"ERR"
“ERR” : A code showing what error has occurred.
Screen mode control
Function
• The screen mode of a product can be changed using a PC.
• Screen mode cannot be controlled when the
Video Wall
function is enabled.
• This control can only be used on models that include a TV.
Viewing screen status (Get Screen Mode Status)
Header
Command
ID
Data length
Checksum
0xAA
0x18
0
Setting the picture size (Set Picture Size)
Header
Command
ID
Data
length
Data
Checksum
0xAA
0x18
1
“Screen Mode”
“Screen Mode”: A code that sets the product status
