Safety information
_ 5
Installation / Moving
Warning
Do not place the machine in an area with dust,
humidity or water leaks.
►
This could result in electric shock or fire.
Caution
Before moving the machine, turn the power off and
disconnect all cords.
Then lift the machine:
If the machine weighs under 20 kg (44.09lb), lift with
1 person.
If the machine weighs 20 kg (44.09lb) - 40kg
(88.18lb), lift with 2 people.
If the machine weighs more than 40 kg (88.18lb), lift
with 4 or more people.
►
The machine could fall, causing injury or machine
damage.
Do not put a cover over the machine or place it in an airtight
location, such as a closet.
►
If the machine is not well-ventilated, this could result in fire.
Do not place the machine on an unstable surface.
►
The machine could fall, causing injury or machine damage.
Make sure you plug the power cord into a grounded electrical
outlet.
►
Otherwise, this could result in electric shock or fire.
The machine should be connected to
the power level which is specified on the label.
►
If you are unsure and want to check the power level you are
using, contact the electrical utility company.
Do not overload wall outlets and extension cords.
►
This can diminish performance, and could result in electric
shock or fire.
Use only No.26 AWG
a
a. AWG: American Wire Gauge
or larger, telephone line cord, if
necessary.
►
Otherwise, it can cause damage to the machine.
Use the power cord supplied with your machine for safe
operation. If you are using a cord which is longer than 2 meters
(6 feet) with a 140V machine, then the gauge should be 16
AWG or larger.
►
Otherwise, it can cause damage to the machine, and could
result in electric shock or fire.
Do not block or push objects into the ventilation opening.
►
This could result in elevated component temperatures which
can cause damage or fire.
Do not allow too many papers to stack up in the paper output
tray.
►
It can damage the machine.
Be care when replacing paper or removing jammed paper.
►
New paper has sharp edges and can cause painful cuts.
This machine's power interception device is the power cord.
►
To switch off the power supply, remove the power cord from
the electrical outlet.
