manualshive.com logo in svg

Samsung ML-1450 Series, User Manual

Share
Download
Samsung ML-1450 Series User Manual Download Page 2

This manual is provided for information purposes only. All information included herein is
subject to change without notice. Samsung Electronics is not responsible for any damages,
direct or indirect, arising from or related to use of this manual.

© 2001 Samsung Electronics Co., Ltd.  All rights reserved.

• ML-1450, ML-1451N and Samsung logo are trademarks of Samsung Electronics Co., Ltd.
• Centronics is a trademark of Centronics Data Computer Corporation.
• PCL and PCL 6 are trademarks of Hewlett-Packard Company.
• IBM and IBM PC are trademarks of International Business Machines Corporation.
• Apple, AppleTalk, TrueType, Laser Writer and Macintosh are trademarks of Apple Computer,

Inc.

• Microsoft, Windows, Windows 9x, Windows Me, Windows 2000, Windows NT, Windows XP

and MS-DOS are registered trademarks of Microsoft Corporation.

• PostScript 3 is a trademark of Adobe Systems Inc.
• All other brand or product names are trademarks of their respective companies or

organizations.

1

Summary of Contents for ML-1450 Series















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands