Samsung ML-1450 Series User Manual Download Page 194

Page: 194 / 206

RINTER

PTIONS

Network Interface Card

Review the precautions on

page F.1

and then follow this procedure to install the Network card

option in your printer.

Unpack the network printer card. You
should find the following items.

Turn the printer power off and unplug all
cables from the printer.

Remove the two screws on the back of
the printer, then remove the control
board cover. See the figure on

page F.2

Remove the two screws, then remove
the plate.

Network card

(PortThru)

User’s guide

CD-ROM

(SyncThru)

Brackets

Screws

Two brackets come with the network
card. Select the long bracket and attach
it to the network card with two screws
provided.

Summary of Contents for ML-1450 Series















































































































































































































Search results

Summary of Contents for ML-1450 Series

Reviews:

Brands by name

Popular brands

Samsung ML-1450 Series, User Manual

Search results

Summary of Contents for ML-1450 Series

Reviews:

Brands by name

Popular brands