ENGLISH
144
144
Troubleshooting : Self-Diagnosis Display
Self-Diagnosis Display
Checklist
✤
Before contacting service personnel, please read and check following table. If the problem continues, contact your nearest
Samsung dealer or authorised service center / personnel.
Symptom
Possible Causes
Measure
Not enough free space for saving files.
The file is corrupted or damaged.
The paper is not inserted or set improperly.
Paper jam or other printing error occurred.
Ink is low.
USB cable is not connected or set improperly.
Battery Power is low.
The memory card is not inserted or damaged.
The memory card is not formatted.
Failed to write a file.
Failed to read a file.
The file is protected.
Memory Full!
File Error!
Paper Error!
Print Error!
Ink Error!
Connect USB Cable!
Low Battery!
Card Error
Not Formatted!
Write Error!
Read Error!
Protected!
Check the space of internal memory or the external memory.
Delete the file.
Check the paper in the printer. If there is no paper, insert paper.
Check the printer message. Refer to the printer manual for details.
Replace ink or toner.
Check the USB connection. Disconnect and try to connect again.
Charge the Battery Pack or connect the AC Power Adapter.
Replace the memory card.
Format the memory card or replace with a formatted one.
Check the memory space or format of the memory card.
Delete the damaged / corrupted file.
To delete a protected file, unlock the protection prior to deletion.
Informs that…
Action
Display
No Power is supplied.
Date / Time is wrong
Focus does not adjust automatically
The Memory Card will not load properly.
Color balance of the picture is not natural.
Digital zoom does not work.
Files stored in the Memory Card can not be
deleted.
The power is not connected properly.
The battery is dead.
The battery is too cold.
The Date / Time is not set.
Focus mode is set to manual.
Recording was done in a too-dark place.
Lens is covered with condensation.
The Memory Card is inserted improperly.
Foreign substances are in the memory slot.
White balance setting is not suitable for the
recording situation.
The digital effect is set enabled.
Memory Card is protected.
The file is protected.
Connect the AC Power Adapter properly, page 24
Replace with a new Battery Pack.
Warm up the battery or move it to a warmer place.
Set the Date / Time, pages 38 ~ 40
Set the focus mode to <Auto>.
Use a strobe or light the place.
Clear the lens and check the focus.
Insert the Memory Card properly, page 35.
Clear the memory slot.
Set proper white balance, page 68.
Turn off the Digital Effects, page 77.
Release the Memory Card protection tab.
Unlock the protection of the file, page 84.
00934C SC-MS10 USA~152 9/30/05 11:00 AM Page 144
