Self-test mode of wired remote controller
Use of self-test mode
1 . When using the self-test mode of the wired remote controller, press the
[＜]
and
[＞]
buttons for more than 3 seconds .
2 . You can operate the self-test mode as follows .
f
f
Load list: When pressing the corresponding button, you can set the load On or Off .
Enter button
Operating part
LCD display
(Red)
Water pump
Booster heater
DHW valve
Zone #1 Valve
Back Up Heater 1
Back Up Heater 2
Back Up Boiler
Zone #2 Valve
Mixing Valve
f
f
When the water pump is turned off, the back up heater cannot be turned on .
f
f
DHW valve, Zone #1 Valve, Zone #2 Valve and Mixing Valve cannot be turned on at the same time .
32
EHS MONO Kit-EU_IM_05388A-00_EN.indd 32
2015-03-18 오전 11:53:50
