Installation
1 . Push the two hooks at the bottom of your Wired Remote Controller at the same time, and then pull up the front cover to
separate it from the rear cover .
❋
❋
Push the two hooks at the same time .
NOTE
•
Insert a flat head screwdriver into the square groove in the upper area of the hook
to disassemble it easily .
2 . Arrange the communication cable so that they fit in the housing along the edges of the rear cover .
If you need more space for the wiring
work, you can take it off .
15 cm
<When the cable is not concealed>
<When the cable is concealed>
10 cm
7
ENGLISH
EHS MONO Kit-EU_IM_05388A-00_EN.indd 7
2015-03-18 오전 11:53:32
