E-
25
Control and Monitoring (Continued)
In the following circumstances, all indoor units under the
same outdoor unit should be set to the same operation
mode limits. Mixed operation can occur continuously
when you set some of indoor unit to cool only and the
other to heat only.
- If the centralized controller is MCM-A202 and is in
group mode
- If the centralized controller is in group mode and the
interface module is MIM-B13 or MIM-B04A
Except above
circumstances, DMS2 changes the
operation mode limit of all indoor units under the same
outdoor unit to same operation mode limit.
- If the centralized controller is in group mode and is
above MCM-A202A and all the interface modules under
the centralized controller are above MIM-B13A
- If the centralized controller is in individual mode
If you set the cooling only indoor unit’s operation mode
limit to heating only, DMS2 may display Heating
Cooling alternately.
MIM-D00A_DMS2_IB_E 33388-2.indd 25
2011-08-17 오전 11:01:10
