E-
135
System Settings (Continued)
Communication Mode Setting by Channel
1
Click [System Settings]
[Tracking] when DMS2 web page menu screen appears.
2
Click [Edit] from communication mode by channel setting.
[Edit] will change to [Cancel].
Selection buttons are enabled. However, the channels which have searched
device maintains its selection button disabled.
3
When each channel is enabled, check the communication mode you want to set by
channel.
You cannot change the communication mode of channel which has currently
connected device.
When setting communication mode of interface module, tracking, monitoring
and controlling for SIM/PIM will be set to be possible.
When setting communication mode of centralized controller, tracking,
monitoring and controlling for centralized controller and SIM/PIM will be set to
be possible.
4
Click [Save] after setting is completed.
“Reading data from DMS2. Please wait.” message appears and saving is completed.
Then, tracking page with disabled items will be displayed again.
If you click [Cancel], check boxes will be disabled and [Cancel] will change to
[Edit].
1
3
2
4
MIM-D00A_DMS2_IB_E 33388-2.indd 135
2011-08-17 오전 11:01:27
