E-
40
4
6
5
4
Select the operation mode.
You can select Auto, HeatEx, By pass and Sleep.
5
Select the fan speed.
You can select Low, High and Turbo.
Fan speed is set to Low in Sleep mode.
6
Set remote controller settings.
You can select Enable RC, Disable RC, and Cond. RC.
When selecting [Enable RC], indoor unit control by wired/
wireless remote controller is not possible. Indoor unit
control is only available in DMS2 web page.
Click [ ] when you want to use wired remote controller in
each room.
Note
When filter warning sign is displayed on ERV status
window
Select the ERV and click [Reset filter]. Filter warning will be
released.
Make sure that ERV must be turned on to control.
Selecting remote controller and filter reset are possible
even if the power of indoor unit is off.
Control and Monitoring (Continued)
MIM-D00A_DMS2_IB_E 33388-2.indd 40
2011-08-17 오전 11:01:12
