E-
52
Cycle Monitoring
You can select an indoor unit and check cycle information.
1
Click [Control and Monitoring]
[Cycle Monitoring] when DMS2 web page menu
screen appears.
2
Click [Select].
DMS2 installation information will be displayed.
3
Select a device to check cycle information.
If you select centralized controller, its subordinate outdoor unit which has the
earliest address will be selected.
If you select interface module, its subordinate outdoor unit will be selected.
If you select indoor unit, upper outdoor unit will be selected.
4
Cycle information of selected outdoor unit and subordinate indoor units.
If the status of outdoor unit and indoor unit is changed, status value turns into blue.
Note
You can check all the cycle information on DVM Plus 2 or DVM Plus 3 with the
centralized controller MCM-A202B and interface module MIM-B13B (or higher
version of those devices) only. However, some cycle information may not be
displayed on any other models of outdoor unit.
Control and Monitoring (Continued)
1
2
3
MIM-D00A_DMS2_IB_E 33388-2.indd 52
2011-08-17 오전 11:01:14
