English - 12
SETTING THE TIME
When power is supplied, “88:88” and then “12:00” is automatically displayed on the
display.
Please set the current time. The time can be displayed in either the 24-hour or 12-hour
notation. You must set the clock:
• When you first install your microwave oven
• After a power failure
Do not forget to reset the clock when you switch to and from summer and winter
time.
1.
Press the
Multi Function Selector Dial
.
2.
Turn the
Multi Function Selector Dial
to set time display
type. (12H or 24H)
3.
Press the
Multi Function Selector Dial
to complete the
setup.
4.
Turn the
Multi Function Selector Dial
to set the hour.
5.
Press the
Multi Function Selector Dial
.
6.
Turn the
Multi Function Selector Dial
to set the minute.
7.
When the right time is displayed, press the
Mu
lti Function
Selector Dial
to start the clock.
Result:
The time is displayed whenever you are not
using the microwave oven.
COOKING/REHEATING
The following procedure explains how to cook or reheat food.
ALWAYS check your cooking settings before leaving the oven unattended.
Open the door. Place the food in the centre of the turntable. Close the door. Never switch
the microwave oven on when it is empty.
1.
Press the
Microwave
button.
Result:
The following indications are displayed:
(microwave mode)
2.
Turn the
Multi Function Selector Dial
until the appropriate
power level is displayed.
At that time, press the
Multi Function Selector Dial
to set
the power level.
3.
Set the cooking time by turning the
Multi Function
Selector Dial
.
Result:
The cooking time is displayed.
4.
Press the
START/+30s
button.
Result:
The oven light comes on and the turntable starts
rotating. Cooking starts and when it has finished.
• The oven beep and flash “End” 4 times.
The oven will then beep one time per minute.
MG28H5125NK_ST_DE68-04246J-05_EN.indd 12
2019-08-29 5:47:59
