12 English
Ins
tallation
Installation
Ø 3mm
10.
Use a 3 mm drill to make holes in the
cabinet to fasten the Base brackets.
Then, fasten with the provides screws
(Type B).
11.
Attach the Trim, and then connect all
electrical cables. Check if the appliance
works properly.
LEFT SIDE
RIGHT SIDE
CENTRE MARK
MARK HERE
MARK HERE
MARK HERE
MARK HERE
CENTRE MARK
5.
Turn the template sheet 180 degrees.
6.
Align the ‘CENTRE MARK’, now on the
left side of the template sheet, with the
centre mark on the cabinet.
7.
Mark the screw hole locations on the
cabinet.
8.
Use the provided screws (Type A) to
fasten two Trim holders to the left and
right side of the microwave.
•
Check the markings (L: left, R: right)
on the brackets to fasten them on
the correct side.
9.
Insert the microwave into the cabinet.
Then, align the Base bracket holes with
the marking from step 4 and 7.
Simple_MG23A7013CT_OL_DE68-04668B-00_EN.indd 12
Simple_MG23A7013CT_OL_DE68-04668B-00_EN.indd 12
19-Feb-21 10:25:39 AM
19-Feb-21 10:25:39 AM
181 / 194
