English - 5
Setting up
The following settings help set the functions.
to use the function, (hDmI-CEC) must be set to on
.
Press the
mEnu
button.
Press the ▲ or ▼ button to select "Application", then press the
EntEr/oK
button.
.
Press the
EntEr/oK
button to select " (HDMI-CEC)", then press the
EntEr/oK
button.
.
Press the ▲ or ▼ button to select "Anynet
+ (HDMI-CEC)", then press the
EntEr/oK
button.
4.
Press the ▲ or ▼ button to select "On", then press the
EntEr/oK
button.
The (HDMI-CEC) function is enabled.
If you select Off, (HDMI-CEC) is disabled.
When the (HDMI-CEC) function is disabled, all the related
operations are deactivated
Setting an Device to turn off automatically when the tV is turned off
.
Press the ▲ or ▼ button to select
auto turn off
, then press the
EntEr/oK
button.
.
Press the ▲ or ▼ button to select "Yes", then press the
EntEr/oK
button.
The "Auto Turn Off" function is enabled.
If you select "No", the "Auto Turn Off" function is canceled.
Press the
ExIt
button to exit.
The active source on the TV remote must be set to TV to use the function.
If you set the " (HDMI-CEC)" to On, the Device List menu appears when you press the "" button on the
remote control.
If you set "Auto Turn Off" to Yes, connected external devices are also turned off when the TV is turned off.
However, if the device is recording, it may not be turned off.
Scanning and Switching between Devices
.
Press the
toolS/
button.
Press the
EntEr/oK
button to select "Device List".
devices connected to the TV are listed.
If you cannot find a device you want, press the red button to scan for devices.
.
Press the ▲ or ▼ button to select to a particular device and press the
EntEr/oK
button. It is switched to the selected device.
Only when you set " (HDMI-CEC)" to On in the "Application" menu, the "Device
List" menu appears.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the
operation during the switching operation.
The time required to scan for devices is determined by the number of connected devices.
When the device scan is complete, the number of devices found are not displayed.
Although the TV automatically scans devices when it is turned on using the
PoWEr
button, devices connected when the TV
is already on are not displayed in the device list.
Therefore press the red button to re-scan devices if necessary.
If you have selected external input mode by pressing the
SourCE
button, you cannot use the function. Make sure to
switch to an device by using the button.
(HDMI-CEC)
(HDMI-CEC) : ON
Auto Turn Off
:
Return
Enter
Off
On
Move
(HDMI-CEC)
(HDMI-CEC) : On
Auto Turn Off
:
Return
Enter
No
Yes
Move
Application
(HDMI-CEC)
►
Device List
Audio Language
:
English
Picture Size
:
16:9
Picture Mode
:
Dynamic
Sound Mode
:
Custom
Sleep Timer
:
Off
Add to Favorite
Auto Store
TOOLS
Enter
Move
Exit
BN68-01180F-ENG.indd 57
2008-06-09 �� 2:34:44
